Q-Logic 64 Switch User Manual


 
C – Messages
Port Loopback Test Dialog
C-16 59048-04 Rev. B
D
Switch is currently unreachable. Unable to
accurately report status of port test.
The application lost communications with
the switch while the switch was running
the loopback tests, and could not
determine whether the tests completed. If
the problem was temporary, restart the
loopback tests.
The port selected for online port test must
be online with active login.
Verify that the port is online with an active
login before starting the loopback test.
Timed out on response notifications. Test
terminated.
The application lost communications with
the switch while the switch was running
the loopback tests, and could not
determine whether the tests completed. If
the problem was temporary, restart the
loopback tests.
Unable to perform loopback test on port...
because port is not in diagnostic state.
because port is a donor port.
because there is already a port test in
progress.
Correct the error indicated, and retry the
loopback test.
Table C-9. Port Loopback Test Dialog Messages (Continued)
Message User Action