Q-Logic 64 Switch User Manual


 
A – Command Line Interface
Show Command
A-60 59048-04 Rev. B
D
Domain 100 (0x64) WWN = 10:00:00:c0:dd:00:ba:68
Domain 101 (0x65) WWN = 10:00:00:60:df:22:2e:06
Domain 102 (0x66) WWN = 10:00:00:c0:dd:00:90:ef
Domain 103 (0x67) WWN = 10:00:00:60:69:50:0b:6c
Domain 104 (0x68) WWN = 10:00:00:c0:dd:00:b8:b7
The following is an example of the Show Fabric command:
SANbox2 #> show fabric
Domain WWN Enet IP Addr FC IP Addr SymbolicName
------ --- ------------ ---------- ------------
16 (0x10) 10:00:00:c0:dd:00:77:81 10.20.68.11 0.0.0.0 gui sb1 .11
17 (0x11) 10:00:00:c0:dd:00:6a:2d 10.20.68.12 0.0.0.0 sw12
18 (0x12) 10:00:00:c0:dd:00:c3:04 10.20.68.160 0.0.0.0 sw .160
19 (0x13) 10:00:00:c0:dd:00:bc:56 10.20.68.108 0.0.0.0 Sb2 .108
The following is an example of the Show Panel command:
SANbox2 #> show panel
User Ports Map
--------------
(displays Non Real-Time data for slot # and blade type-instance)
SL#0 SL#1 SL#2 SL#3 SL#4 SL#5 SL#6 SL#7 SL#8 SL#9 SL#10
PS-0 IO-0 IO-1 IO-2 IO-3 CPU-0 IO-4 IO-5 IO-6 IO-7 PS-1
------------------------------------------------------------------
* 0 8 16 24 * 32 40 48 56 *
* 1 9 17 25 * 33 41 49 57 *
* 2 10 18 26 * 34 42 50 58 *
* 3 11 19 27 * 35 43 51 59 *
* 4 12 20 28 * 36 44 52 60 *
* 5 13 21 29 * 37 45 53 61 *
* 6 14 22 30 * 38 46 54 62 *
* 7 15 23 31 * 39 47 55 63 *
The following is an example of the Show FDMI command:
SANbox2 #> show fdmi
HBA ID Manufacturer Model Ports
-------- --------------- ------- -----
20:00:00:00:c9:25:9b:96 Emulex Network Systems LP9000 2
20:00:00:00:ca:25:9b:96 QLogic Corporation QL2330 2