Filter
Top Products
2 – Using SANbox Manager
Exiting SANbox Manager
59048-04 Rev. B 2-11
D
Click the Open Existing Fabric View File radio button to open the Open
View dialog which prompts you to specify a fabric view file that you saved
earlier. Refer to ”Opening a Fabric View File” on page 3-4.
Click the Start Application Without Specifying a Fabric radio button to
open the SANbox Manager window without displaying any fabric, as shown
in Figure 2-6.
Figure 2-6. SANbox Manager Window
2.6
Exiting SANbox Manager
To exit a SANbox Manager application session, open the File menu and select
Exit. If you have not yet defined an encryption key, the Save Default Fabric View
File dialog, shown in Figure 2-7, prompts you to save the current fabric view as
the default fabric view file. Enter an encryption key in the Default Fabric File
Encryption Key field. Re-enter the encryption key in the Re-enter Encryption Key
to Confirm field. Click the OK button to save the current set of fabrics to the
default fabric view file in the working directory.
The encryption key is used to encrypt the sensitive data in the default fabric view
file. Refer to ”Changing the Encryption Key for the Default Fabric View File” on
page 2-13 for information about changing this encryption key. If an encryption key
has been defined and the View File Auto Save and Load preferences setting is set
to Enable, the current fabric view is automatically saved to your default fabric view
file upon exit future SANbox Manager sessions.