Filter
Top Products
4 – Managing Switches
Displaying Switch Information
59048-04 Rev. B 4-9
D
4.2.2
FDMI Data Window
The FDMI data window displays device information from the fabric and allows
devices to register certain information with the fabric. To open the FDMI data
window, open the topology display and click the FDMI tab below the window.
SANbox Manager will report any and all FDMI information reported by the entry
switch, if FDMI is enabled on the entry switch. To view FDMI data, FDMI must be
enabled on the entry switch and on all other switches in the fabric which are to
report FDMI data. To enable FDMI, select a switch in the topology display or open
the faceplate display, open the Switch menu, select Switch Properties, and click
the Enable FDMI radio button in the Switch Properties dialog.
The Detailed FDMI Display dialog is opened after clicking the Information (i)
button in the Details column of the FDMI data window, and lists additional FDMI
information for the device. To open the FDMI data window, open the topology
display and click the FDMI data window tab.
Table 4-3. FDMI Data Window Entries
Entry Description
HBA WWN HBA World Wide Name
Details Detail device information. Click the Information (i) button
to open the Detailed FDMI Display dialog. Refer to
Figure 4-6 for detailed FDMI information.
Vendor Device vendor
Model Device model
Node WWN Node World Wide Name
H/W Version Version of hardware
Driver Version Version of driver software
F/W Version Version of firmware
OS Operating System used
# Ports Number of device ports