A – Command Line Interface
Show Command
59048-04 Rev. B A-61
D
The following is an example of the Show FDMI WWN command:
SANbox2 #> show fdmi 21:00:00:e0:8b:09:3b:17
FDMI Information
-----------------
Manufacturer QLogic Corporation
SerialNumber 95923
Model QCP2340
ModelDescription
NodeWWN 20:00:00:e0:8b:09:3b:17
HardwareVersion A
DriverVersion 4.12 Beta 21
OptionRomVersion
FirmwareVersion 3.2.15
OSSystemName SunOS 5.8
MaximumCTPayload
NumberOfPorts 1
Port 21:00:00:e0:8b:09:3b:17
SupportedFC4Types FCP
SupportedSpeed 2Gb/s
CurrentSpeed 2Gb/s
MaximumFrameSize 2048
OSDeviceName qla2300(0)
The following is an example of the Show NS (local domain) command:
SANbox2 #> show ns
Seq Domain Port Port
No ID ID Type COS PortWWN NodeWWN
--- ------ ------ ---- --- ------- -------
1 19 (0x13) 1301e1 NL 3 21:00:00:20:37:73:13:69 20:00:00:20:37:73:13:69
2 19 (0x13) 1301e2 NL 3 21:00:00:20:37:73:12:9b 20:00:00:20:37:73:12:9b
3 19 (0x13) 1301e4 NL 3 21:00:00:20:37:73:05:26 20:00:00:20:37:73:05:26
4 19 (0x13) 130d00 N 3 21:01:00:e0:8b:27:a7:bc 20:01:00:e0:8b:27:a7:bc
The following is an example of the Show NS [domain_ID] command:
SANbox2 #> show ns 18
Seq Domain Port Port
No ID ID Type COS PortWWN NodeWWN
--- ------ ------ ---- --- ------- -------
1 18 (0x12) 120700 N 3 21:00:00:e0:8b:07:a7:bc 20:00:00:e0:8b:07:a7:bc