2 – Using SANbox Manager
Setting SANbox Manager Preferences
59048-04 Rev. B 2-15
D
Enable (default) or disable the Event Browser. Refer to ”Displaying the
Event Browser” on page 3-9. If the Event Browser is enabled using the
Preferences dialog, the next time SANbox Manager is started, all events
from the switch alarm log will be displayed. If the Event Browser is disabled
when SANbox Manager is started and later enabled, only those events from
the time the Event Browser was enabled and forward will be displayed.
Choose the default port view when opening the faceplate display. You can
set the faceplate to reflect the current port type (default), port speed, port
operational state, or port transceiver media. Regardless of the default port
view you choose, you can change the port view in the faceplate display by
opening the View menu and selecting a different port view option. Refer to
the corresponding subsection for more information:
”Displaying Port Types” on page 6-2
”Displaying Port Operational States” on page 6-3
”Displaying Port Speeds” on page 6-3
”Displaying Transceiver Media Status” on page 6-4
Figure 2-9. Preferences Dialog – SANbox Manager
To set preferences for your SANbox Manager sessions, do the following:
1. Open the File menu, and select Preferences to open the Preferences
dialog.
2. Enter or browse for paths to the working directory and browser.
3. In the Application-wide Options area, choose the preferences you want.
4. Click the OK button to save the changes.