Filter
Top Products
4 – Managing Switches
Configuring a Switch
4-26 59048-04 Rev. B
D
4.9.3
Network Properties
Use the Network Properties dialog shown in Figure 4-12 to change IP and SNMP
configuration parameters. After making changes, click the OK button to put the
new values into effect. To open the Network Properties dialog, select a switch in
the topology display or open the faceplate display, open the Switch menu and
select Network Properties.
Figure 4-12. Network Properties Dialog
Table 4-7. Timeout Values
Parameter Description
R_A_TOV Resource Allocation Timeout: Represents the maximum time a frame
could be delayed in the Fabric and still be delivered. The default is
10000 milliseconds.
E_D_TOV Error Detect Timeout: Represents the maximum round trip time that
an operation between two N_Ports could require. The default is 2000
milliseconds.
Note: Since Read Community, Trap Community, and Write Community
settings are like passwords, they are write-only fields; the current
settings are not displayed.