Filter
Top Products
R0E530640MCU00 User’s Manual 5. Debugging Functions
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 138 of 229
(1) Search history
The conditions once searched are left as a history in the history column while the High-performance Embedded Workshop
remains active.
The next time you perform a search, choose the line you want to search from this history and click the Add button. That way,
you can search trace information with that condition again.
The search history contains a history of up to 10 last searches performed.
(2)
OR search
You can perform a search using two or more search conditions as OR conditions.
To set OR conditions, begin by setting the first condition (shown on the first line in the search content setting column) and then
click the New button.
Then enter the second condition. At this time, the second condition is added to the second line in the search content setting
column.
In this case, the conditions on the first and second lines in the search content setting column can be used as OR conditions for a
search performed.
Up to 16 conditions (16 lines) can be set.
CAUTION
The conditions set on one and the same line in the search content setting column comprise AND conditions.
5.9.11 Saving Trace Information to Files
To save trace information to a file, choose File -> Save from the context menu or click the Save button
in the toolbar.
The trace information displayed in the Trace window is saved in binary or text format.
(1) Saving in binary format
To save trace information in binary format, choose “Trace Data File: Memory Image (*.rtt)” in the Save As Type list box of
the dialog box that is displayed when you choose File -> Save from the context menu.
When saved in binary format, all cycles are saved. This type of file can be loaded into the Trace window.
(2)
Saving in text format
To save trace information in text format, choose “Text Files: Save Only (*.txt)” in the Save As Type list box of the dialog box
that is displayed when you choose File -> Save from the context menu.
When saved in text format, a range of cycles to be saved can be specified. This type of file can only be saved and cannot be
loaded into the Trace window.