Renesas M16C/64 Network Card User Manual


 
R0E530640MCU00 User’s Manual 6. Troubleshooting (Action on Error)
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 211 of 229
6. Troubleshooting (Action on Error)
6.1 Flowchart to Remedy the Troubles
Figure 6.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator
debugger starts up. Check this while the user system is disconnected. For the latest FAQs, visit the Renesas Tools Homepage.
http://www.renesas.com/tools
Turning on emulator
LED display of emulator
1. Check the connection of power supply cable.
See 2.5 Connecting the Emulator Power Supply.
Device setting dialog box
of emulator debugger
1. Check the operating environment etc. of the emulator
debugger.
See “5.1 Setting Up the Emulation Environment.
2. Reinstall the emulator debugger.
Configuration properties dialog
box of emulator debugger
See “6.3.(2) Configuration Properties Dialog Box Does Not
Appear at Emulator Debugger Startup.
Editor window of emulator
debugger displayed
See “6.3.(4) Errors Occur at Emulator Debugger Startup.
Emulator debugger startup completed
Normal
Normal
Normal
Normal
Not normal
Not normal/Error displayed
Not normal/Error displayed
Error displayed
Connecting dialog box of
emulator debugger
See “6.3.(3) Errors Occur at Connecting Dialog Box.
Normal
Not normal/Error displayed
Figure 6.1 Flowchart to remedy the troubles