Renesas M16C/64 Network Card User Manual


 
R0E530640MCU00 User’s Manual 1. Outline
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 20 of 229
1.4 Specifications
Table 1.5 lists the specifications of the R0E530640MCU00.
Table 1.5 Specifications of the R0E530640MCU00
Applicable MCU M16C/60 Series M16C/64 Group MCUs with 512 KB ROM
Applicable MCU mode Single-chip mode, memory expansion mode, microprocessor mode
Maximum ROM/RAM capacity 1. Internal flash ROM: 8KB+16KB+512KB
0E000h--0FFFFh, 10000h--13FFFh, 80000h--FFFFFh
2. Internal RAM: 31KB
00400h--07FFFh
Maximum operating frequency Power supply voltage: 2.7--5.5V 25MHz (with PLL)
(Emulation memory 0wait: 12MHz, 1wait or more: 25MHz)
Software break 4096 points (uses RAM for break point capability before execution)
Hardware break 16 points (Execution address, bus detection, interrupt, external trigger signal)
Combination, pass count - Cumulative AND/OR/status transition
- 255 pass counts
Exception event detection Violation of access protection/task stack access violation/OS
dispatch/initialization omitted
Real-time trace 192bits × 4M cycles
(Address, data, status, CPU status, bus status, target status, task ID, time stamp, 32
external trigger inputs)
Trace mode Fill until stop/full/point and delay/repeat (free)/repeat (full)
Trace extract/delete Capture/Do not Capture by events
or
Specified data access instruction extraction/trace extraction before and after point
Real-time RAM monitor - 16,384 bytes (512 bytes × 32 blocks)
- Data/last access
Time measurement - Execution time between program start and stop
- Maximum/minimum/average execution time and pass counts of specified eight
sections
- Count clock: Equal to MCU Clock or 10ns—1.6us
Coverage measurement 2 MB (256 KB × 8 blocks)
Profile 1 MB (128 KB × 8 blocks)
Connection to user system 100-pin 0.65mm pitch QFP R0E0100TNPFJ00
100-pin 0.5mm pitch LQFP R0E0100TNPFK00
Emulator power supply Supplied from included AC adapter (power supply voltage: 100--240 V, 50/60 Hz)