Filter
Top Products
R0E530640MCU00 User’s Manual 4. Preparing to Debug
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 67 of 229
4. Preparing to Debug
4.1 Starting the High-performance Embedded Workshop
Follow the procedure described below to start the High-performance Embedded Workshop.
(1) Connect the host machine and the E100 Emulator and user system. Then turn on the power to the E100 Emulator and user
system.
(2) From Programs on the Start menu, choose Renesas -> High-performance Embedded Workshop -> High-performance
Embedded Workshop.
The Welcome! dialog box shown below will appear.
Figure 4.1 Welcome! dialog box
Select a startup method from the following.
- Create a new project workspace
- Open a recently used project workspace
Select this option when you use an existing workspace.
A history of the workspace you open will be displayed.
- Browse another project workspace
Select this option when you use an existing workspace.
This is the option available to choose when the workspace you opened has no history recorded.