Renesas M16C/64 Network Card User Manual


 
R0E530640MCU00 User’s Manual 4. Preparing to Debug
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 68 of 229
4.2 Creating a New Workspace (Toolchain Unused)
The procedure for creating a new project workspace differs depending on whether you use a toolchain or not.
The E100 Emulator has no toolchains included in it. You can use a toolchain in an environment in which the C/C++ compiler
package is installed.
Follow the procedure described below to create a new workspace.
(1) In the Welcome! dialog box, select the radio button titled “Create a new project workspace” and click the OK button.
Figure 4.2 Welcome! dialog box
(2) Project Generator will start.
Figure 4.3 New Project Workspace dialog box
Workspace Name: Enter a workspace name here.
Project Name: Enter a project name here. If the same name as a workspace name is good, you do not
need to enter it.
Directory: Enter a directory in which you want a workspace to be created. Or you can click the
Browse button and select a workspace directory from the ensuing list.
CPU family: Select the CPU family of the MCU you are using.