Filter
Top Products
R0E530640MCU00 User’s Manual 5. Debugging Functions
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 84 of 229
5.1.4 Creating a Memory Map
On the Memory map page of the Configuration properties dialog box, set a lending memory allocation. You can specify 4
areas. (In a unit of 4KB)
Figure 5.3 Configuration properties dialog box (Memory map page)
The MCU group box displays the device selected in the Device setting dialog box. You cannot change it on this page. The
Memory map page does not appear when single-chip mode has been selected.
(1) Allocating emulation memory
You can allocate emulation memory for up to 4 areas.
Select a check box of the area to be used, and enter the start address and end address.
The addresses can be set in a unit of 4KB. Therefore, the low 12 bits of the start address and end address are fixed.