Renesas M16C/64 Network Card User Manual


 
R0E530640MCU00 User’s Manual Terminology
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 15 of 229
Terminology
Some specific words used in this user's manual are defined as follows:
MCU unit R0E530640MCU00
This means the E100 emulator for M16C/64 Group.
Emulator system
This means an emulator system built around the MCU unit R0E530640MCU00. The emulator system is configured with an
emulator main unit R0E001000EMU00, MCU unit R0E530640MCU00, emulator power supply, USB cable, emulator
debugger and host machine.
Integrated development environment High-performance Embedded Workshop
This tool provides powerful support for the development of embedded applications for Renesas microcomputers. It has an
emulator debugger function allowing the emulator to be controlled from the host machine via an interface. Furthermore, it
permits a range of operations from editing a project to building and debugging it to be performed within the same application.
In addition, it supports version management.
Emulator debugger
This means a software tool starting up from the High-performance Embedded Workshop to control this product and enable
debugging.
Firmware
This means a control program stored in the emulator. This analyzes contents of communication with the emulator debugger
and controls the emulator hardware. To upgrade the firmware, download the program form the emulator debugger.
Host machine
This means a personal computer used to control the emulator.
Target MCU
This means the MCU to be debugged.
User system
This means a user's application system using the MCU to be debugged.
User program
This means the program to be debugged.
Evaluation MCU
This means the MCU mounted on the emulator which is operated in the specific mode for tools.
#
This symbol is used to show Low active. (e.g. RESET#: Reset signal)