Filter
Top Products
R0E530640MCU00 User’s Manual 4. Preparing to Debug
REJ10J1733-0100 Rev.1.00 Apr. 01, 2008
Page 71 of 229
Workspace Name: Enter a workspace name here.
Project Name: Enter a project name here. If the same name as a workspace name is good, you do not
need to enter it.
Directory: Enter a directory in which you want a workspace to be created. Or you can click the
Browse button and select a workspace directory from the ensuing list.
CPU family: Select the CPU family of the MCU you are using.
Toolchain: To use a toolchain, select the appropriate toolchain here. If you do not use, select None.
The other list boxes are used for setting up a toolchain. If no toolchains are installed, the information specific to the CPU
family is displayed here. Click the OK button.
(3) Set the CPU and options for the toolchain and make other necessary settings.
(4) Select the debugger target.
Figure 4.8 Setting the Target System for Debugging dialog box
Select the target platform you use by placing a check mark in its check box and click the Next button.