Filter
Top Products
Communications
4-17
Installing eConnect
eConnect allows the mobile computer to make a Direct Serial Remote Access Service (RAS)
Connection. Without it the mobile computer cannot communicate through the ethernet cradle.
eConnect is used only when establishing a connection using the Four Slot Ethernet Cradle.
1. To install the eConnect on the mobile computer, download the latest version of the software
on to the host computer (from http://devzone.symbol.com).
2. On the mobile computer copy the eConnect .cab file to the /Application directory.
Figure 4-14. Copy eConnect .cab File Window
3. Double-tap the eConnect .cab file, the eConnect install window appears. Double -tap OK.
Figure 4-15. eConnect Install Window