Filter
Top Products
MC9000-G Product Reference Guide for Embedded Windows® CE .NET
7-18
Magnetic Stripe Reader
This section describes how to set up and use the snap-on MSR with the MC9000-G. The MSR snaps
on to the mobile computer and can be removed easily when not in use.
Figure 7-11. MSR
The MSR:
• Provides mobile computer’s operating power and battery charging power when used with
the Symbol approved power supply and cable.
• Allows the mobile computer to capture data from magnetic stripe cards. (To download MSR
data capture software, visit: http://devzone.symbol.com.)
• Provides serial connection through the serial pass-through port for communication with a
serial device, such as a host computer. For communication setup procedures, see Serial
Communications Setup on page 4-10.
• Provides USB connection through the USB pass-through port for communication with a USB
device, such as a host computer. For communication setup procedures, see USB Connection
Setup on page 4-13.
• Charges the mobile computer’s battery, when used with the appropriate power supply.
Card Reader Slot
Latches
Power PortCommunications Port
Pogo Pin Pass Through
Connector
Latch Grip