Filter
Top Products
Settings
3-59
Reader Parameters
Use the Reader Parameters window to set the scanning read parameters. The reader parameter
settings are dependent on the type of scanner used, either a laser scanner or an imager. See Table
3-8 on page 3-60 for laser scanner settings and see Table 3-9 on page 3-61 for imager settings.
Figure 3-57. Reader Parameters Window
1. Double-tap the Ctl Panel icon - double-tap Scanner Settings - double-tap Reader
Parameters. The Reader Parameters window appears. To change any item in the Reader
Parameters column, use the up and down arrows to select the item.
2. Use the left and right arrow buttons to increment the value.
3. Tap OK to return to the Control Panel window.
Laser Scanner Reader Parameters
Imager Reader Parameters