Filter
Top Products
Applications
5-29
Table 5-4. Gemini RFID Window Icons / Menus
Icon Description
Launches the Locate Tag window, see Locate Tag on page 5-38.
Launches the Program Tag window, see Program Tag on page 5-40.
Clears the tag list, see Clearing the Display on page 5-31.
Saves the complete list of tags, see Saving Tag Data on page 5-32.
Previous and Next buttons appear on the menu when read tags exceed the amount of
tags that can fit in the tag list display.
Tap to display the previous page.
Tap to display the next page.
File and Mode menus, see File Menu on page 5-33 and Mode Menu on page 5-37.
By default, when a tag is successfully decoded the mobile computer beeps. Tap the
icon to toggle between beep enable and beep disable.
RFID module power on icon. The icon appears when the RFID module power is on and
the mobile computer is attempting to read RFID tags.
Use the Attenuation Slide Bar (see Figure 5-28 on page 5-35) to set the power range
from 0 (full power) to 255 (low power). Drag the Attenuation Slide Bar to optimize tag
reading and to minimize interference. For closer tag use a lower setting and for further
away tag use a higher setting.