Filter
Top Products
Communications
4-15
8. Tap OK to save any changes made.
Every mobile computer should have a unique device name. Never try to
synchronize more than one mobile computer to the same name.
9. Connect the device to the host computer, see Figure 7-5 on page 7-10 to set up a Single Slot
Serial/USB Cradle, or see Figure 7-14 on page 7-21 to set up a MSR or a CAM.
The cradle requires a dedicated port. It cannot share a USB port with any
other device. Refer to the computer user manual supplied to locate the
USB(s).
10.Upon connection, synchronization occurs automatically.
Using ActiveSync
1. Review the configuration of the cradle using the MobileDox Cradle Manager.
a. A WIN server must be present on your network. Ensure that the WINS Address provided
in the TCP/IP Settings tab matches the IP address of the WIN server on your network.
b. Ensure that the Use NAT checkbox is not selected in the Port Settings tab.
2. Insert the terminal into the cradle. The mobile computer displays a succession of dialog
boxes appear, indicating the status of the connection. Also the ActiveSync icon on the host
computer’s system tray turns green to indicate that the host computer and the mobile
computer are communicating.