Filter
Top Products
Applications
5-35
Settings
The Settings window is used to set the number of iterations to read tags, set the class type(s) to read
(Gen2, Class 0 and/or Class 1), and set and test read/write power. Tap File - Settings to display the
Settings window.
Figure 5-28. RFID - Settings Window
To establish settings:
• Enter a number in the Read Tag Outer Loop: text box to set the number of outer inventory
loops (iterations to read tags). Up to 255 loops are allowed. The default Read Tag Outer Loop
setting is 5.
• Enter a number in the Read Tag Inner Loop / Dwell text box to set the number of inner
inventory loops (iterations to read tags). Up to 255 loops are allowed. The default Read Tag
Inner Loop setting is 3.
Read Tag Outer Loop and Read Tag Inner Loop settings attempt to read a tag
for a period of time based on the parameters entered in these fields. For more
information, refer to the SMDK Help File.
• Enter the Duty Cycle Timing, On (ms) or Off % values. The default value is 0.
• Select the Gen2 check box to enable reading of the Gen2 tags.
• Select the Class 0 check box to enable reading of the Class 0 tags.
• Select the Class 0 User Data check box to enable reading of the Class 0 user data tags.
• Select the Class 1 check box to enable reading of the Class 1 tags.
Attenuation values
Attenuation slide bars