Filter
Top Products
Applications
5-41
4. Set the write strength by moving the Write Att: (attenuation) slide bar to a value in a range
between 0 (full write power) and 255 (low write power/off).
5. A password is required to lock a tag and/or kill a tag.
Remember the password. Once a tag is locked, it cannot be killed without the
password.
6. Tap Program Tags. It might take more than one attempt to program the tag.
7. When a tag is successfully programmed, a status message displays in the Status Message
text box.
8. Tap Read to read a newly programmed tag.
For a successful tag read, the allowable read distance from the front of the
mobile computer scan exit window to the tag is 0.2 ft. - 10 ft. (0.061 m to 3.1 m).
9. Tap Done to return to the Gemini RFID window.
To successfully write data to a tag, the tag must be no less than 1 ft (.31 m)
from the antenna and no greater than 2 ft (.61 m) from the antenna.