Filter
Top Products
User's Guide
Solving Problems 6-17
Table 6-1. Troubleshooting Guide––continued
Symptom Probable Cause/Corrective Action
Multipart forms or labels tear
99
99
9 Print density fine-adjustment
during printing. Or, labels peel is set too dark. Hold down
off the backing sheet during Print Density button and re-
printing. adjust print density.
99
99
9 PH GAP and PFORCE param-
eters on Setup menu are not
set to Auto, or settings are
incorrect. Check settings.
99
99
9 Forms or labels are too thick
to feed around platen. If media
is pin-feed and you have a top-
mounted pull tractor option, or
your printer has bottom-feed
tractors, try feeding forms from
bottom of printer.
Printing goes off right side of page.
99
99
9 WIDTH setting on Setup menu
is incorrect. Check setting.
Lines of text print on top of one
99
99
9 AUTO LF mode on Setup
another. menu is off. Turn it on.
99
99
9 Paper is not taut between trac-
tors or around platen. Reload
paper.
99
99
9 Wrong paper path selected.
Check paper path selection.
User's Guide
Solving Problems 6-17
Table 6-1. Troubleshooting Guide––continued
Symptom Probable Cause/Corrective Action
Multipart forms or labels tear
99
99
9 Print density fine-adjustment
during printing. Or, labels peel is set too dark. Hold down
off the backing sheet during Print Density button and re-
printing. adjust print density.
99
99
9 PH GAP and PFORCE param-
eters on Setup menu are not
set to Auto, or settings are
incorrect. Check settings.
99
99
9 Forms or labels are too thick
to feed around platen. If media
is pin-feed and you have a top-
mounted pull tractor option, or
your printer has bottom-feed
tractors, try feeding forms from
bottom of printer.
Printing goes off right side of page.
99
99
9 WIDTH setting on Setup menu
is incorrect. Check setting.
Lines of text print on top of one
99
99
9 AUTO LF mode on Setup
another. menu is off. Turn it on.
99
99
9 Paper is not taut between trac-
tors or around platen. Reload
paper.
99
99
9 Wrong paper path selected.
Check paper path selection.