Filter
Top Products
User's Guide
Control Panel 4-29
Using Page Setup Parameters
The next section of the Setup menu is page setup. Page setup param-
eters let you specify forms length and margins.
Set Form Length
LENG lets you specify the length of the form you are using in 1/6-inch
increments. This setting is very important since it controls continuous-
forms feeding.
You can select a number from 0 to 182. To determine the correct
number to use for your form, multiply the length of the form in inches by
6. For example, if your form is 11 inches long (11 inches × 6 = 66), you
should select 66. When you set form length, the printer sets the top-of-
form at the current line and clears the top and bottom margins.
Set Maximum Print Width
WIDTH lets you specify the maximum print width. If the printer re-
ceives a line that exceeds the maximum print width, the excess prints on
the next line. On narrow-carriage printers, you can specify 8", 8.5", or
11". On wide-carriage printers, you can specify 8", 13.6" or 16". If
you set the maximum print width to 11" or 16", be sure to load the paper
so that it aligns with the blue line at the far left on the paper scale. Also,
11"- and 16"-wide printing is unidirectional and slower than normal.
26) LENG: 66/6"
27) WIDTH: 13.6"
ABCDEFGH
ABCDEFGH
ABCDEFGH
ABCDEFGHIJKLMN
ABCDEFGHIJKLMN
ABCDEFGHIJKLMN
ABCDEFGHIJKLMNOPQ
ABCDEFGHIJKLMNOPQ
ABCDEFGHIJKLMNOPQ
User's Guide
Control Panel 4-29
Using Page Setup Parameters
The next section of the Setup menu is page setup. Page setup param-
eters let you specify forms length and margins.
Set Form Length
LENG lets you specify the length of the form you are using in 1/6-inch
increments. This setting is very important since it controls continuous-
forms feeding.
You can select a number from 0 to 182. To determine the correct
number to use for your form, multiply the length of the form in inches by
6. For example, if your form is 11 inches long (11 inches × 6 = 66), you
should select 66. When you set form length, the printer sets the top-of-
form at the current line and clears the top and bottom margins.
Set Maximum Print Width
WIDTH lets you specify the maximum print width. If the printer re-
ceives a line that exceeds the maximum print width, the excess prints on
the next line. On narrow-carriage printers, you can specify 8", 8.5", or
11". On wide-carriage printers, you can specify 8", 13.6" or 16". If
you set the maximum print width to 11" or 16", be sure to load the paper
so that it aligns with the blue line at the far left on the paper scale. Also,
11"- and 16"-wide printing is unidirectional and slower than normal.
26) LENG: 66/6"
27) WIDTH: 13.6"
ABCDEFGH
ABCDEFGH
ABCDEFGH
ABCDEFGHIJKLMN
ABCDEFGHIJKLMN
ABCDEFGHIJKLMN
ABCDEFGHIJKLMNOPQ
ABCDEFGHIJKLMNOPQ
ABCDEFGHIJKLMNOPQ