Filter
Top Products
User's Guide
4-8 Control Panel
Moving the Bail
Pressing the Bail button moves the bail back and forth. During normal
printing operations, it is not necessary to use the Bail button since the
bail moves automatically.
Parking the Paper
Pressing the Paper Park button with pin-feed paper loaded in the printer
causes the paper to reverse-feed until the top edge of the first sheet is
halfway through the tractors. Before pressing the Paper Park button,
however, tear off the last printed sheet that has fed beyond the tear bar.
With paper park, removing pin-feed paper from the printer is quick and
easy. To reload paper, just press Form Feed.
Restoring Printer Settings
Holding down the Alt button and pressing the Paper Park button lets you
restore printer settings to the factory (Fctry) settings or to the settings
you saved previously under one of five user names (Usr 1 to Usr 5).
When you first press the Alt and Paper Park buttons, the current user
name appears on the control panel display. If you continue to hold down
the Alt button and press the Paper Park button again, you can cycle
through the available user names. If you release the Alt button with the
current user name displayed, this function is cancelled. If you release the
Alt button with another user name displayed, the printer settings saved
under that user name take effect.
)Note: For more detailed information on this function, refer to Restore
Printer Settings and Save Printer Settings later in this section.
Bail
Paper
Park
Alt
Paper
Park
User's Guide
4-8 Control Panel
Moving the Bail
Pressing the Bail button moves the bail back and forth. During normal
printing operations, it is not necessary to use the Bail button since the
bail moves automatically.
Parking the Paper
Pressing the Paper Park button with pin-feed paper loaded in the printer
causes the paper to reverse-feed until the top edge of the first sheet is
halfway through the tractors. Before pressing the Paper Park button,
however, tear off the last printed sheet that has fed beyond the tear bar.
With paper park, removing pin-feed paper from the printer is quick and
easy. To reload paper, just press Form Feed.
Restoring Printer Settings
Holding down the Alt button and pressing the Paper Park button lets you
restore printer settings to the factory (Fctry) settings or to the settings
you saved previously under one of five user names (Usr 1 to Usr 5).
When you first press the Alt and Paper Park buttons, the current user
name appears on the control panel display. If you continue to hold down
the Alt button and press the Paper Park button again, you can cycle
through the available user names. If you release the Alt button with the
current user name displayed, this function is cancelled. If you release the
Alt button with another user name displayed, the printer settings saved
under that user name take effect.
)Note: For more detailed information on this function, refer to Restore
Printer Settings and Save Printer Settings later in this section.
Bail
Paper
Park
Alt
Paper
Park