Filter
Top Products
User's Guide
Control Panel 4-33
Turn Demand Document
Mode On and Off
DEMAND lets you turn the demand document mode on and off. The
demand document mode lets you remove a pin-fed form without wasting
the next form. With the mode on, pressing the Ready button turns
printing off, displays DEMND on the control panel, and advances the last
printed page up to the tear bar. You can then tear off the page if you
want to. Pressing the Ready button again causes one of the following
actions:
99
99
9 If you removed the last printed page, the paper reverse feeds to the
next top-of-form, the READY message reappears, and printing
continues.
99
99
9 If you did not remove the last printed page, the paper reverse feeds
to its original position, the READY message reappears, and printing
resumes at the point where it left off.
You can select from the following settings:
99
99
9 On. Turns the demand document mode on.
99
99
9 Beep. Turns the demand document mode on and causes the printer
to begin beeping 15 seconds after you press the Ready button as a
reminder to re-enable printing.
99
99
9 Tear. Turns the demand document mode on and causes the printer
to reverse feed the paper to the next top-of-form when you re-enable
printing, regardless of whether you tear off the last printed sheet.
This option is useful when printing thick multipart forms that jam
when the leading edge of the form is reverse fed below the printhead.
99
99
9 Auto. Causes the printer to advance the bottom of the last printed
page to the tear bar whenever the printer is idle. You don't have to
press the Ready button. As soon as the printer receives subsequent
data to print, the paper reverse feeds as usual.
99
99
9 Off. Turns the demand document mode off.
35) DEMAND: Off
User's Guide
Control Panel 4-33
Turn Demand Document
Mode On and Off
DEMAND lets you turn the demand document mode on and off. The
demand document mode lets you remove a pin-fed form without wasting
the next form. With the mode on, pressing the Ready button turns
printing off, displays DEMND on the control panel, and advances the last
printed page up to the tear bar. You can then tear off the page if you
want to. Pressing the Ready button again causes one of the following
actions:
99
99
9 If you removed the last printed page, the paper reverse feeds to the
next top-of-form, the READY message reappears, and printing
continues.
99
99
9 If you did not remove the last printed page, the paper reverse feeds
to its original position, the READY message reappears, and printing
resumes at the point where it left off.
You can select from the following settings:
99
99
9 On. Turns the demand document mode on.
99
99
9 Beep. Turns the demand document mode on and causes the printer
to begin beeping 15 seconds after you press the Ready button as a
reminder to re-enable printing.
99
99
9 Tear. Turns the demand document mode on and causes the printer
to reverse feed the paper to the next top-of-form when you re-enable
printing, regardless of whether you tear off the last printed sheet.
This option is useful when printing thick multipart forms that jam
when the leading edge of the form is reverse fed below the printhead.
99
99
9 Auto. Causes the printer to advance the bottom of the last printed
page to the tear bar whenever the printer is idle. You don't have to
press the Ready button. As soon as the printer receives subsequent
data to print, the paper reverse feeds as usual.
99
99
9 Off. Turns the demand document mode off.
35) DEMAND: Off