Filter
Top Products
User's Guide
Control Panel 4-27
Turn Double-High Mode On and Off
HIGH lets you turn the double-high mode on and off. In double-high
mode, characters stretch to twice their normal height (downward in the
AMT and Diablo 630 emulations; upward in the IBM and Epson emula-
tions). You can select On or Off. When you turn on the double-high
mode, the LPI setting changes to three lines per inch. When you turn off
the mode, the LPI setting changes to six lines per inch.
Turn Double-Wide Mode On and Off
WIDE lets you turn the double-wide on and off. In double-wide mode,
characters stretch rightward to twice their normal width. You can select
On or Off. When you turn on the double-wide mode, the PITCH and
CELL settings change to one-half their current values. When you turn
off the mode, these settings return to their original values.
Turn Super/Subscript Modes
On and Off
SCRIPT lets you turn on and off the superscript and subscript modes.
In superscript mode, characters shrink to about half the normal size and
print above the normal print line. In subscript mode, the same small
characters print below the normal print line. You can select Supr to turn
the superscript mode on; Sub to turn the subscript mode on; or Off to
turn both modes off.
Turn Underline Mode On and Off
UNDLINE lets you turn the underline mode on and off. In underline
mode, all characters and spaces are underlined. You can select On or
Off.
19) HIGH: Of f
21) SCRIPT: Off
22) UNDLINE: Off
20) WIDE: Of f
User's Guide
Control Panel 4-27
Turn Double-High Mode On and Off
HIGH lets you turn the double-high mode on and off. In double-high
mode, characters stretch to twice their normal height (downward in the
AMT and Diablo 630 emulations; upward in the IBM and Epson emula-
tions). You can select On or Off. When you turn on the double-high
mode, the LPI setting changes to three lines per inch. When you turn off
the mode, the LPI setting changes to six lines per inch.
Turn Double-Wide Mode On and Off
WIDE lets you turn the double-wide on and off. In double-wide mode,
characters stretch rightward to twice their normal width. You can select
On or Off. When you turn on the double-wide mode, the PITCH and
CELL settings change to one-half their current values. When you turn
off the mode, these settings return to their original values.
Turn Super/Subscript Modes
On and Off
SCRIPT lets you turn on and off the superscript and subscript modes.
In superscript mode, characters shrink to about half the normal size and
print above the normal print line. In subscript mode, the same small
characters print below the normal print line. You can select Supr to turn
the superscript mode on; Sub to turn the subscript mode on; or Off to
turn both modes off.
Turn Underline Mode On and Off
UNDLINE lets you turn the underline mode on and off. In underline
mode, all characters and spaces are underlined. You can select On or
Off.
19) HIGH: Of f
21) SCRIPT: Off
22) UNDLINE: Off
20) WIDE: Of f