AMT Datasouth ACCEL-6300 Printer User Manual

Open as PDF

of 257

User's Guide

Code Sets D-39

Table D-6. Epson and IBM Escape Sequences––continued

Function ASCII Hexadecimal Decimal Description

Text Functions––continued

Set language .............................. ESC ESC G n 1B 1B 47 n 27 27 71 n These sequences select a language for the printer to use

English, US........................... ESC ESC G NUL 1B 1B 47 00 27 27 71 0 while printing text. The language setting causes the printer

English, US (alternate) ........ ESC R NUL 1B 52 00 27 82 0 to replace some of the standard ASCII printable characters

French .................................. ESC ESC G SOH 1B 1B 47 01 27 27 71 1 with alternate characters that are used in a specific lan-

French (alternate)................ ESC R SOH 1B 52 01 27 82 1 guage. The character replacements are shown in the Con-

German................................ ESC ESC G STX 1B 1B 47 02 27 27 71 2 trol Panel section of this guide, under the Set Language

German (alternate) ............. ESC R STX 1B 52 02 27 82 2 heading.

English, UK .......................... ESC ESC G ETX 1B 1B 47 03 27 27 71 3

English, UK (alternate) ....... ESC R ETX 1B 52 03 27 82 3 )Note: These sequences apply only to fonts with inter-

Danish I................................ ESC ESC G EOT 1B 1B 47 04 27 27 71 4 national characters. Also, the ESC R n sequence is not

Danish I (alternate) ............. ESC R EOT 1B 52 04 27 82 4 supported when the IBM XL24 emulation is active.

Swedish ................................ ESC ESC G ENQ 1B 1B 47 05 27 27 71 5

Swedish (alternate) .............. ESC R ENQ 1B 52 05 27 82 5

Italian ................................... ESC ESC G ACK 1B 1B 47 06 27 27 71 6

Italian (alternate)................. ESC R ACK 1B 52 06 27 82 6

Spanish I ............................... ESC ESC G BEL 1B 1B 47 07 27 27 71 7

Spanish I (alternate) ............ ESC R BEL 1B 52 07 27 82 7

Japanese............................... ESC ESC G BS 1B 1B 47 08 27 27 71 8

Japanese (alternate) ............ ESC R BS 1B 52 08 27 82 8

Norwegian ........................... ESC ESC G HT 1B 1B 47 09 27 27 71 9

Norwegian (alternate)......... ESC R HT 1B 52 09 27 82 9

Danish II .............................. ESC ESC G LF 1B 1B 47 0A 27 27 71 10

Danish II (alternate)............ ESC R LF 1B 52 0A 27 82 10

Spanish II ............................. ESC ESC G VT 1B 1B 47 0B 27 27 71 11

Spanish II (alternate)........... ESC R VT 1B 52 0B 27 82 11

Portuguese ........................... ESC ESC G FF 1B 1B 47 0C 27 27 71 12

Portuguese (alternate)......... ESC R FF 1B 52 0C 27 82 12

Print character string ............. ESC \ n1 n2 1B 5C n1 n2 27 92 n1 n2 This sequence prints a character string beginning at the

list list list current print position. Any printable character can be included in

the series, even those assigned control codes. The values of

variables n1 and n2 define the number of characters to print.

This number equals the number of character codes in list. The

printer interprets n1 and n2 as follows:

Number of characters = (256 x n2) + n1

The list is a series of character codes for the characters to

print. For example, to print the characters assigned codes 10

through 20 decimal, the correct sequence is 27 92 11 0 10 11 12

13 14 15 16 17 18 19 20 (decimal).

)Note: This sequence is not supported when an Epson

emulation is active.