Filter
Top Products
BLADEOS 6.5.2 Application Guide
198 Chapter 14: FCoE and CEE BMD00220, October 2010
Viewing FIP Snooping Information
ACLs automatically generated under FIP snooping are independent of regular, manually configure
ACLs, and are not listed with regular ACLs in switch information and statistics output. Instead,
FCoE ACLs are shown using the following CLI commands:
For example:
For each ACL, the required traffic criteria are listed, along with the action taken (permit or deny) for
matching traffic. ACLs are listed in order of precedence and evaluated in the order shown.
The administrator can also view other FCoE information:
Operational Commands
The administrator may use the operational commands to delete FIP-related entries from the switch.
To delete a specific FCF entry and all associated ACLs from the switch, use the following command:
RS G8124# show fcoe fips information (Show all FIP-related information)
RS G8124# show fcoe fips port <ports> (Show FIP info for a selected port)
RS G8124# show fcoe fips port 2
FIP Snooping on port 2:
This port has been detected to be an FCF port.
FIPS ACLs configured on this port:
Ethertype 0x8914, action permit.
dmac 00:00:18:01:00:XX, Ethertype 0x8914, action permit.
RS G8124# show fcoe fips fcf (Show all detected FCFs)
RS G8124# show fcoe fips fcoe (Show all FCoE connections)
RS G8124# no fcoe fips fcf <FCF MAC address>