Filter
Top Products
BLADEOS 6.5.2 Application Guide
BMD00220, October 2010 Chapter 14: FCoE and CEE 213
These flags are available for the following CEE features:
Application Protocol
DCBX exchanges information regarding FCoE and FIP snooping, including the 802.1p priority
value used for FCoE traffic. The advertise flag is set or reset using the following
command:
The willing flag is set or reset using the following command:
PFC
DCBX exchanges information regarding whether PFC is enabled or disabled on the port. The
advertise flag is set or reset using the following command:
The willing flag is set or reset using the following command:
ETS
DCBX exchanges information regarding ETS priority groups, including their 802.1p priority
members and bandwidth allocation percentages. The advertise flag is set or reset using the
following command:
The willing flag is set or reset using the following command:
RS G8124(config)# [no] cee port <port alias or number> dcbx app_proto
advertise
RS G8124(config)# [no] cee port <port alias or number> dcbx app_proto
willing
RS G8124(config)# [no] cee port <port alias or number> dcbx pfc advertise
RS G8124(config)# [no] cee port <port alias or number> dcbx pfc willing
RS G8124(config)# [no] cee port <port alias or number> dcbx ets advertise
RS G8124(config)# [no] cee port <port alias or number> dcbx pfc willing