Filter
Top Products
BLADEOS 6.5.2 Application Guide
BMD00220, October 2010 Chapter 4: Authentication & Authorization Protocols 71
Accounting
Accounting is the action of recording a user's activities on the device for the purposes of billing
and/or security. It follows the authentication and authorization actions. If the authentication and
authorization is not performed via TACACS+, there are no TACACS+ accounting messages sent
out.
You can use TACACS+ to record and track software login access, configuration changes, and
interactive commands.
The G8124 supports the following TACACS+ accounting attributes:
protocol (console/Telnet/SSH/HTTP/HTTPS)
start_time
stop_time
elapsed_time
disc_cause
Note – When using the Browser-Based Interface, the TACACS+ Accounting Stop records are sent
only if the Logout button on the browser is clicked.
Command Authorization and Logging
When TACACS+ Command Authorization is enabled, BLADEOS configuration commands are
sent to the TACACS+ server for authorization. Use the following command to enable TACACS+
Command Authorization:
When TACACS+ Command Logging is enabled, BLADEOS configuration commands are logged
on the TACACS+ server. Use the following command to enable TACACS+ Command Logging:
The following examples illustrate the format of BLADEOS commands sent to the TACACS+
server:
RS G8124(config)# tacacs-server command-authorization
RS G8124(config)# tacacs-server command-logging
authorization request, cmd=shell, cmd-arg=interface ip
accounting request, cmd=shell, cmd-arg=interface ip
authorization request, cmd=shell, cmd-arg=enable
accounting request, cmd=shell, cmd-arg=enable