Filter
Top Products
BLADEOS 6.5.2 Application Guide
BMD00220, October 2010 Chapter 26: Simple Network Management Protocol 359
5. Use the community table to specify which community string is used in the trap.
SNMPv2 Trap Host Configuration
The SNMPv2 trap host configuration is similar to the SNMPv1 trap host configuration. Wherever
you specify the model, use snmpv2 instead of snmpv1.
Note – BLADEOS 6.5 supports only IPv4 addresses for SNMP trap hosts.
/c/sys/ssnmp/snmpv3/comm 10 (Define the community string)
index v1trap
name public
uname v1trap
RS G8124(config)# snmp-server user 10 name v2trap
RS G8124(config)# snmp-server group 10 security snmpv2
RS G8124(config)# snmp-server group 10 user-name v2trap
RS G8124(config)# snmp-server group 10 group-name v2trap
RS G8124(config)# snmp-server access 10 name v2trap
RS G8124(config)# snmp-server access 10 security snmpv2
RS G8124(config)# snmp-server access 10 notify-view iso
RS G8124(config)# snmp-server notify 10 name v2trap
RS G8124(config)# snmp-server notify 10 tag v2trap
RS G8124(config)# snmp-server target-address 10 name v2trap
address 100.10.2.1
RS G8124(config)# snmp-server target-address 10 taglist v2trap
RS G8124(config)# snmp-server target-address 10 parameters-name
v2param
RS G8124(config)# snmp-server target-parameters 10 name v2param
RS G8124(config)# snmp-server target-parameters 10 message snmpv2c
RS G8124(config)# snmp-server target-parameters 10 user-name v2trap
RS G8124(config)# snmp-server target-parameters 10 security snmpv2
RS G8124(config)# snmp-server community 10 index v2trap
RS G8124(config)# snmp-server community 10 user-name v2trap