Filter
Top Products
BLADEOS 6.5.2 Application Guide
BMD00220, October 2010 Chapter 20: OSPF 301
2. Enable OSPFv3.
This is equivalent to the OSPFv2 enable option in the router ospf command path.
3. Define the backbone.
This is identical to OSPFv2 configuration.
4. Define the stub area.
This is identical to OSPFv2 configuration.
5. Attach the network interface to the backbone.
The ipv6 command path is used instead of the OSPFv2 ip command path
6. Attach the network interface to the stub area.
The ipv6 command path is used instead of the OSPFv2 ip command path
RS G8124(config)# ipv6 router ospf
RS G8124(config-router-ospf3)# enable
RS G8124(config-router-ospf3)# area 0 area-id 0.0.0.0
RS G8124(config-router-ospf3)# area 0 type transit
RS G8124(config-router-ospf3)# area 0 enable
RS G8124(config-router-ospf3)# area 1 area-id 0.0.0.1
RS G8124(config-router-ospf3)# area 1 type stub
RS G8124(config-router-ospf3)# area 1 enable
RS G8124(config-router-ospf3)# exit
RS G8124(config)# interface ip 3
RS G8124(config-ip-if)# ipv6 ospf area 0
RS G8124(config-ip-if)# ipv6 ospf enable
RS G8124(config-ip-if)# exit
RS G8124(config)# interface ip 4
RS G8124(config-ip-if)# ipv6 ospf area 1
RS G8124(config-ip-if)# ipv6 ospf enable
RS G8124(config-ip-if)# exit