Blade ICE G8124-E Personal Computer User Manual


 
BLADEOS 6.5.2 Application Guide
352 Chapter 25: Link Layer Discovery Protocol BMD00220, October 2010
To view detailed information for a remote device, specify the Index number as found in the
summary. For example, in keeping with the sample summary, to list details for the first remote
device (with an Index value of 1), use the following command:
Note – Received LLDP information can change very quickly. When using show commands, it is
possible that flags for some expected events may be too short-lived to be observed in the output.
Time-to-Live for Received Information
Each remote device LLDP packet includes an expiration time. If the switch port does not receive an
LLDP update from the remote device before the time-to-live clock expires, the switch will consider
the remote information to be invalid, and will remove all associated information from the MIB.
Remote devices can also intentionally set their LLDP time-to-live to 0, indicating to the switch that
the LLDP information is invalid and should be immediately removed.
RS G8124(config)# show lldp remote-device 1
Local Port Alias: 3
Remote Device Index : 1
Remote Device TTL : 99
Remote Device RxChanges : false
Chassis Type : Mac Address
Chassis Id : 00-18-b1-33-1d-00
Port Type : Locally Assigned
Port Id : 23
Port Description : 7
System Name :
System Description : BNT 1/10Gb Uplink Ethernet Switch Module,
flash image: version 5.1.0,
boot image: version 5.1.0.12
System Capabilities Supported : bridge, router
System Capabilities Enabled : bridge, router
Remote Management Address:
Subtype : IPv4
Address : 10.100.120.181
Interface Subtype : ifIndex
Interface Number : 128
Object Identifier :