Filter
Top Products
SETTING UP THE MFC AND COMPUTER
12 - 2
If You Don’t Have a CD-ROM Drive
All software is supplied on CD-ROM. If you need a Floppy Diskette
version you must tell the Brother Representative the version of Windows
®
that you are using and your MFC model number. To order,
call Brother at 1-888-879-3232 (USA), 1-800-668-2768
(from within Canada) or 1-514-685-6464 (from within Montreal).
Only Multi-Function Link
®
Pro and PaperPort
®
are available on Floppy
Disks, item numbers DSK9131 (for Windows
®
3.1x) and DSK9195 (for
Windows
®
95/98). If you are using Windows NT
®
Workstation
Version 4.0, the software is not available on Floppy Diskette.
Computer Requirements
The following are the minimum computer requirements you need to set up
and operate the MFC as a printer. Use only a shielded interface cable that
is IEEE-1284 compliant, and that is less than 6.5 feet (2 meters) long.
CPU Pentium 75 or Higher
RAM 8MB or greater for Windows
®
3.1x
8MB or greater for Windows
®
95
(16MB recommended)
16MB or greater for Windows
®
98 and Windows NT
®
Workstation Version 4.0 (32MB recommended)
Hard Disk Drive 50MB CD-ROM 1
150MB CD-ROM 1 & 2
Operating System Windows
®
3.1x, 95/98 or NT
®
Workstation Version 4.0,
DOS environment compatible with your Windows
®
version