Filter
Top Products
INITIAL SETUP
4 - 1
Initial Setup
4
Getting Started
Setting Dialing Mode (Tone/Pulse)
Your MFC comes set to accommodate tone (multi-frequency) dialing
service. If you have pulse (rotary) dialing service, you need to change the
dialing mode.
1
Press
Function
,
1
,
1
,
1
.
2
Use or to select TONE or PULSE
DIALING:TONE?
dialing mode and press
Set
.
DIALING:PULSE?
3
Press
Stop
to exit.
Setting Date and Time
Your MFC displays the date and time, and prints it on every fax you send.
In the event of a power failure, you may have to reset the date and time.
All other settings remain unaffected.
1
Press
Function
,
1
,
1
,
2
.
2
Enter the last two digits of the year and
ENTER YEAR:XX
press
Set
.
For example, enter 00 for the year 2000.
3
Enter two digits for the month and
ENTER MONTH:XX
press
Set
.
For example, enter 09 for September,
or 10 for October.
4
Enter two digits for the day and
ENTER DAY:XX
press
Set
.
For example, 06
5
Enter the time in 24-hour format and
ENTER TIME:XX:XX
press
Set
.
For example, enter 15:25 for 3:25 PM.
6
Press
Stop
.
The screen now displays the date and time you set, and displays it
whenever the MFC is standing by.
4