Filter
Top Products
INITIAL SETUP
4 - 2
Setting Station ID
You can store your name, fax number, and telephone number to be printed on
all fax pages you send. (See Composing Electronic Cover Page, page 6-7.)
1
Press
Function
,
1
,
1
,
3
.
2
Enter your fax number (up to 20 digits)
FAX:
and press
Set
.
(You must enter a fax number to proceed.)
3
Enter your telephone number (up to 20
TEL:
digits)and press
Set
. If your telephone
number and fax number are the same,
enter the same number again.
(This number appears on Cover pages.)
4
Press
Set
.
5
Use the dial pad to enter your name
NAME:
or your company name (up to 20
characters) and press
Set
.
(See Entering Text, below.)
6
Press
Stop
.
The screen returns to the date and time.
If your Station ID has already been programmed, the screen prompts “1”
to make a change, or “2” to exit without changing.
Entering Text
When you are setting certain functions, such as the Station ID, you may need
to enter text into the MFC. Most number keys have three or four letters
printed above them. The keys for 0, #, and
don’t have printed letters
because they are used for special characters.
By pressing the appropriate number key the correct number of times, you can
access the character you want.
Key once twice three times four times
2
AB C
3
DE F
4
GH I
5
JK L
6
MN O
7
PQ R S
8
TU V
9
WX Y Z