Filter
Top Products
SETUP SEND
6 - 5
Manual Transmission (ADF)
Manual transmission lets you hear the dial tone, ringing and fax receiving
tones before sending the fax.
1
Insert the document in the feeder or on the scanner glass.
2
Press
Hook
for a dial tone.
3
Enter the fax number you want to call (you can enter the digits using the
dial pad, or you can enter a One Touch or Speed Dial number or you can
call from the Tel-index). (See Auto Dial Numbers and Dialing Options,
page 7-1.)
4
When you hear the fax tone, press
Start
.
5
Press
1
to begin sending.
1.SEND 2.RECEIVE
Manual and Automatic Fax Redial
If you’re sending a fax manually and the line is busy, press
Redial/Pause
to
retry the number.
If you’re sending a fax automatically (using the ADF) and the line is busy,
the MFC will automatically redial up to three times at 5 minute intervals.
Dual Access
If the document feeder is empty, you can place a document in the feeder
and set temporary settings, dial a number, and begin scanning the fax into
memory—even when the MFC is receiving a fax, sending a fax, or
printing a fax from memory. The screen displays the new job number and
available memory.
You cannot use Scan Fax when the MFC is sending, receiving or printing a
fax.
If you get a MEMORY FULL message while scanning the first page of a
fax press
Stop
to cancel the scan. If you get a MEMORY FULL message
while scanning in a subsequent page, you’ll have the option to press
Start
to
transmit the pages scanned so far, or to press
Stop
to cancel the operation.
The number of documents you can scan into memory varies with the data
they contain.