Filter
Top Products
SETTING UP THE MFC AND COMPUTER
12 - 8
IMPORTANT
Please see the README.WRI file in the root directory of the CD-ROM
(or diskette) for last minute important installation and troubleshooting
information.
Receiving Messages into the PC
To receive faxes into your PC through the MFC: (See Connecting the
MFC to the Computer, page 12-3.)
1
Make sure the MFC is connected to the PC. The PC and the
Multi-Function Link
®
Pro Main Menu must be running at all times.
2
Load the Multi-Function Link
®
Pro software into your PC.
(See Installing Multi-Function Link
®
Pro Software (CD-ROM 1)
page 12-4.)
3
On your PC in the Multi-Function Link
®
Pro software:
A Select Setup from the Preferences... pull-down menu in the Main
Menu.
B Under Answer Mode select Fax only.
C Click the OK button.
4
Check that the Multi-Function Link
®
Pro mode is ON (see below).
Multi-Function Link
®
Pro Mode
You can switch Multi-Function Link
®
Pro Mode on and off as needed. If
you want your fax messages to go directly into your PC, make sure the MF
Link setting is ON. If you want faxes to print on your MFC when they
arrive, you can switch MF Link mode to OFF. (See On-Line
Documentation for Multi-Function Link
®
Pro on the Brother CD-ROM
and Using the Multi-Function Link
®
Pro Software Chapter 15, page 15-1.)
1
Press
Function
,
1
,
2
,
8
.
2
Press or to select ON (or OFF) and press
Set
.
3
Press
Stop
to exit.