Filter
Top Products
USING MULTI-FUNCTION LINK
®
PRO SOFTWARE
15 - 5
Receiving Faxes into the PC
To receive faxes into your PC through the MFC, you must first have
connected your MFC to your computer. Then, you can load the
Multi-Function Link
®
Pro software. (See Setting up the MFC and
Computer to Work Together, page 12-1.)
Use the following checklists for the MFC and PC, to make sure you have
properly set up the MFC and PC to work together.
Checklist for the MFC
1
To make sure the MF Link mode is active, press
Function
,
1
,
2
,
8
.
2
Use or to select ON (not OFF).
3
Press
Set
.
Set MF Link mode to OFF only if you want all incoming faxes to be
printed at the MFC.
Checklist for Your PC
1
Make sure the MFC is connected to the PC.
2
In the Main Menu, select the Setup pull-down menu.
3
Select Preferences...
4
Under Answer Mode, select Fax only.
5
Click the OK button.
6
Keep the PC and the Multi-Function Link Pro Main Menu running at all
times.