Filter
Top Products
ASSEMBLY AND CONNECTIONS
2 - 3
Paper
The quality of your document can be affected by the kind of paper you use
in the MFC. You can use plain paper, coated paper, transparencies, glossy
paper, organizer paper, and envelopes. We recommend testing various
paper types before purchasing large quantities. For best results, use
genuine Brother special coated paper, glossy paper, and transparencies.
(See page ii for information about ordering Brother accessories.)
When you print on coated paper, transparencies, and glossy paper, be sure
to select the correct media in the “Quality/Color” tab in the printer driver.
When using coated paper or transparencies, avoid stacking by removing
each page after it exits the machine.
About Brother Paper
Brother paper is manufactured specifically for this MFC, to provide you
optimum print quality:
Quality Coated Paper for 360 dpi Color Ink Jet printing—normal
mode (BP36CL for letter)
High Quality Coated Paper for 720 dpi Color Ink Jet printing—
super fine mode (BP72CL for letter)
Color Ink Jet Transparencies— fine mode (BPTRL for letter)
Color Ink Jet Glossy Paper— superfine mode (BPGLL for letter)
■
Brother coated (ink jet) paper is coated only on one side. Make sure this
whiter (coated) side is face down when loading in the paper cassette, or
manual feed slot.
■
The coated side of glossy paper is shiny. Do not touch the shiny side.
Load glossy paper in the paper cassette with the shiny side facing down.
■
Do not touch either side of transparencies, because perspiration is
absorbed easily and may decrease output quality.
■
For optimum output quality, use paper that is appropriate for your
resolution setting.
■
Store paper in the original bag, and keep it sealed. Keep paper flat and
away from moisture, direct sunlight and heat.
1
Do not use this product near water, for example, near a bath tub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a swimming
pool.
2
Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
3
Do not use the telephone to report a gas leak in the vicinity of the leak.