Filter
Top Products
IMPORTANT INFORMATION
20 - 2
Your telephone company may make changes to its facilities, equipment,
operations or procedures that could affect the proper functioning of your
equipment. If they do, you will be notified in advance to give you an
opportunity to maintain uninterrupted telephone service.
If you experience trouble with your MFC 9100C, please contact a Brother
Authorized Service Center for information on obtaining service or repair.
The telephone company may ask that you disconnect this equipment from
the line until the problem has been corrected or until you are sure that the
equipment is not malfunctioning.
If you are not able to solve a problem with your MFC, contact Brother at
USA: 1-800-284-4329 (voice)
1-908-575-8790 (fax)
From within Canada: 1-800-853-6660 (voice)
1-514-685-4898 (fax)
From within Montreal: 1-514-685-6464 (voice)
WARNING
For protection against the risk of electrical shock, always disconnect all
cables from the wall outlet before servicing, modifying or installing the
equipment.
This equipment may not be used on coin service lines provided by the
telephone company or connected to party lines.
Brother cannot accept any financial or other responsibilities that may be
the result of your use of this information, including direct, special or
consequential damages. There are no warranties extended or granted by
this document.
Important—About the InterfaceCable
This machine complies with FCC standards, which are applied to the USA
only. The shielded interface cable supplied with your MFC should be
used according to FCC 15.27 (C). In addition, a grounded plug should be
plugged into a grounded AC outlet after checking the rating of the local
power supply for the printer to operate properly and safely.