Brother MFC-9100C Printer User Manual


 
SETTING UP THE MFC AND COMPUTER
12 - 6
If you are using Windows
®
95/98 or Windows NT
®
Workstation Version
4.0, the Software Installation program appears automatically when you
insert the Brother CD-ROM.
For Windows
®
95/98 and Windows NT
®
Workstation Version 4.0, you
can also click on Start at the Desktop, select Run and then enter
x:\SETUP.EXE.
If you are using Windows NT
®
3.51 or earlier, the following error message
will appear on the screen: You are running Windows NT
®
3.51 or earlier.
Brother MFL Pro does not support this version of Windows NT
®
. YOU
MUST UPGRADE TO WINDOWS NT 4.0 AND REINSTALL MFL Pro!!
If you are using Windows NT
®
Workstation 4.0 and you are not logged-in
as the Administrator, an error message appears explaining the problem.
A window will appear listing the options:
For each application you install, click on its name in the Software
Installation window and follow the instructions on the screen. The last
step will be to restart Windows
®
and access the Software Installation
window again to install the next application.
3
Click on “Install Multi-Function Link
®
Pro Software” and follow the
prompts on the screen.
After you install the Multi-Function Link
®
Software, and restart your PC.
The MFC Remote Setup dialog box will be displayed on your PC screen.
MFC Remote Setup allows you to quickly set up your MFC by taking
advantage of the ease and speed of programming on your PC. When you
access this application, the settings on the MFC will be displayed on your
PC so you can change them as needed and then download them to the
MFC.