Filter
Top Products
SETUP SEND
6 - 6
Real Time Transmission
When memory is full, the MFC cannot continue scanning documents into
memory before sending. However, you can turn on REALTIME TX.
1
Insert the document in the feeder or on the scanner glass.
2
Press
Function
,
1
,
3
,
8
.
8. REAL TIME TX
3
To change the default setting, press or to select ON (or OFF) and
press
Set
. Go to Step 5—OR—For the next fax transmission only,
press
or to select NEXT FAX ONLY and press
Set
.
REAL TIME:ON?
4
For the next fax only, press or to select ON (or OFF) and press
Set
.
5
Press
1
if you want to select additional settings. The display returns to
the SETUP SEND menu—OR—Press
2
if you are finished choosing
settings and go to Step 6.
6
Enter fax number and press
Start
.
Checking the Jobs Status
Check which jobs are still waiting in memory to be sent. (If no jobs are
waiting, the screen displays NO JOB WAITING.) (See Canceling Jobs in
Memory, page 6-7.)
1
If the machine is idle, press
Function
,
1
,
4
.
—OR—
If the MFC is busy, press
Stop
.
2
If you have multiple jobs waiting, use or to scroll through the list.
3
Press
Stop
to exit.