Filter
Top Products
REMOTE FAX OPTIONS
8 - 2
Programming a Fax Forwarding Number
When Fax Forwarding is set to ON, your MFC stores the received fax in
memory, then dials the fax number you’ve programmed, and forwards the
fax message.
1
Press
Function
,
1
,
7
,
1
.
2
Press or until the screen displays
FAX FORWARD?
FAX FORWARD? and press
Set
.
3
Enter the forwarding number
FWD#:
ENTER & SET
(up to 20 digits) and press
Set
.
4
Press
Stop
to exit.
Setting Fax Storage
If you set Fax Storage to ON, you will be able to retrieve fax messages
from another location, using Fax Forwarding, Paging, or Remote Retrieval
functions. The screen will indicate when you have a fax stored in
memory. The memory can store up to 600 pages of faxes.
1
Press
Function
,
1
,
7
,
2
.
2
Press or to select ON (or OFF)
SELECT & SET
FAX STORAGE:OFF?
and press
Set
.
3
Press
Stop
to exit.
If there are faxes in memory when you
turn Fax Storage OFF, you must choose
to delete them or exit without turning
Fax Storage on.
4
Press
1
, to erase faxes from memory
ERASE ALL FAX?
1.YES 2.NO
and to turn Fax Storage off
—OR—
Press
2
, to exit without deleting faxes
or changing this setting.
(See Printing a Fax in Memory, page 5-4.)