Filter
Top Products
11 - 3 WALK-UP PHOTOCAPTURE CENTER
™
Media Card Indicator Lights:
■
LED light is ON, the media card
is inserted properly.
■
LED is OFF, the media card is
not properly inserted.
■
LED is BLINKING, the media
card is being read or written to.
The MFC can only read one Media card at a time so do not insert
more than one card. The settings that you want to use with the card
will be kept until you take out the media card from the drive (slot).
1
Insert the media card firmly into the media drive (slot).
2
When you insert your media card
into the proper slot, the LCD shows.
3
Press Options.
4
Press or to select
PHOTOCAPTURE
.
Press Menu/Set.
5
The LCD scrolls:
Do NOT unplug the power cord or remove the media card from the
PhotoCapture Center
™
while the MFC is reading or writing to the card
(LED is blinking).
You will loose your data or damage the card
.
Do not select
COPY
because you will enter the copy operations
and not the PhotoCapture Center
™
.
(See Printing the Index
(Thumbnails) on page 11-4.)
(See Printing images on
page 11-5.)
(See Changing the settings
for printing images on page
11-6.)
LED
C.FLASH ACTIVE
Press Options key -----
SELECT ↑ ↓ & SET
PHOTOCAPTURE
PHOTOCAPTURE
PRINT INDEX
PHOTOCAPTURE
PRINT IMAGES
PHOTOCAPTURE
CHANGE SETTINGS