Filter
Top Products
REMOTE FAX OPTIONS (NOT AVAILABLE FOR COLOR FAXES) 8 - 5
Remote commands
Follow the commands below to access features when you are away
from the machine. When you call the MFC and enter your Remote
Access Code (159 ), the system will give you two short beeps and
you must enter a remote command.
Remote commands Operation details
95 Change the Fax Forwarding
or Paging settings
1 OFF If you hear one long beep, the change has
been accepted. If you hear three short
beeps, you cannot change it because the
conditions have not been met. You can
register your Fax Forwarding number by
entering 4. Fax Forwarding number (see
page 8-6). Once you have registered the
number, the MFC will change to FAX
FWD:ON mode.
2 Fax Forwarding
3 Paging
4 Fax Forwarding number
6 Fax Storage ON You can turn FAX STORAGE to ON or OFF.
7 Fax Storage OFF
96 Retrieve a fax
2 Retrieve all faxes Enter the number of a remote fax machine to
receive stored fax message(s). (See page
8-6.)
3 Erase faxes from the
memory
If you hear one long beep, you can erase fax
messages from the memory.
97 Check the Receiving Status
1 Fax
You can check whether your MFC has received
any faxes. If it has, you will hear one long beep.
If it hasn’t, you will hear three short beeps.
98 Change the Receive Mode
1 EXTERNAL TAD If you hear one long beep, you can change
the Receive Mode.
If you hear three short beeps, you cannot
change it.
2 FAX/TEL
3 FAX ONLY
90 Exit After a long beep, you can exit Remote
Retrieval.