Filter
Top Products
INTRODUCTION 1 - 11
Special Line Considerations
Roll Over Phone Lines
A roll over phone system is a group of two or more separate telephone lines
that pass incoming calls to each other if they are busy. The calls are usually
passed down or “rolled over” to the next available phone line in a preset order.
Your MFC can work in a roll over system as long as it is the last
number in the sequence, so the call cannot roll away. Do not put the
MFC on any of the other numbers; when the other lines are busy and
a second fax call is received, the fax call would be transferred to a
line that does not have a fax machine. Your MFC will work best on
a dedicated line.
Two-Line Phone System
A two-line phone system is nothing more than two separate phone numbers
on the same wall outlet. The two phone numbers can be on separate jacks
(RJ11) or combined into one jack (RJ14). Your MFC must be plugged into an
RJ11 jack. RJ11 and RJ14 jacks may be equal in size and appearance and
both may contain four wires (black, red, green, yellow). To test the type of jack,
plug in a two-line phone and see if it can access both lines. If it can, you must
separate the line for your MFC. (See Easy Receive on page 5-4.)
Converting Telephone Wall Outlets
There are three ways to convert to an RJ11 jack. The first two ways may
require assistance from the telephone company. You can change the wall
outlets from one RJ14 jack to two RJ11 jacks. Or, you can have an RJ11
wall outlet installed and slave or jump one of the phone numbers to it.
The third way is the easiest: Buy a triplex adapter. You can plug a
triplex adapter into an RJ14 outlet. It separates the wires into two
separate RJ11 jacks (Line 1, Line 2) and a third RJ14 jack (Lines 1
and 2). If your MFC is on Line 1, plug the MFC into L1 of the triplex
adapter. If your MFC is on Line 2, plug it into L2 of the triple adapter.
RJ14
RJ11
Triplex Adapter
RJ14