Filter
Top Products
INTRODUCTION 1 - 9
If you do not receive all your faxes, you must reset the setting
on your external TAD to four rings.
If You Subscribe to your Telephone Company’s Distinctive Ring
Service:
You may connect an external TAD to a separate wall jack only
if you subscribe to your telephone company’s Distinctive Ring
service, have registered the distinctive ring pattern on your
MFC, use that number as a fax number and set your machine’s
Receive mode to MANUAL. The recommended setting is three
or four rings on the external TAD when you have the telephone
company’s Distinctive Ring Service.
If You Do Not Subscribe to Distinctive Ring Service:
You must plug your TAD into the EXT. jack of your MFC. If your
TAD is plugged into a wall jack, both your machine and the TAD
will try to control the phone line. (See illustration below.)
Do not connect a TAD elsewhere on the same phone line
(unless you have the Distinctive Ring service).