Filter
Top Products
PRINTING REPORTS 9 - 1
9
9
Printing Reports
MFC settings and activity
You need to set up the Transmission Verification Report and Activity
Report Interval in the menu table.
Press Menu/Set, 2, 4, 1.
—
OR
—
Press Menu/Set, 2, 4, 2.
Customizing the Transmission Verification Report
You can use the Transmission Report as proof that you sent a fax.
This report lists the time and date of transmission and whether the
transmission was successful (OK). If you select ON or ON+IMAGE,
the report will print for every fax you send.
If you send a lot of faxes to the same place, you may need more than
the job numbers to know which faxes you must send again.
Selecting
OFF
+
IMAGE
will print a section of the fax’s first page on the
report to help you remember.
1
Press Menu/Set, 2, 4, 1.
2
Press or to select
OFF
,
OFF
+
IMAGE
,
ON
or
ON
+
IMAGE
.
Press Menu/Set.
3
Press Stop/Exit.
When the feature is OFF, the Report will only print it there is a
transmission error. (NG).
SETUP REPORTS
1.TRANSMISSION
SETUP REPORTS
2.ACT.INTERVAL
ACT. INTERVAL
EVERY 50 FAXES